This is one of the better M1 tank models on the market. Assembly is good, there's a few issues I'll detail later. However for the price, it's a good representation of several versions of the Abrams tank, and comes with a lot of nice extras. So first, the good:
+This kit will let you assemble one of the following: two different M1A2s from 3 ACR circa 2003, one US Army M1A1 from 2003, a USMC M1A1 also from 2003, and then two US Army tanks operating in Germany or Kosovo circa 1999. There's decals for all of those, complete painting schematics, and the different equipment from type to type (CITV for M1A2s, Missile Counter-Measure and different smoke grenade launchers for the USMC version etc)
+Assembly is pretty easy. There's nothing that was too tricky about it. Almost everything fits
+Instructions are clear, each different type of tank has clearly marked call outs for specific assembly steps.
+Tracks are great for "rubber band" style. They take and keep paint and glue, handled all the weathering products I use without damage or marring.
+Unlike many models, it comes with bags and boxes to help you fill out the stowage.
And the bad:
-Minor fit issue with the top hull to the rear of the tank. If you don't do anything to it, it sorta stands out a little bit, but it cleans up okay, just annoying.
-This is not the most detailed Abrams on the market. It's quite nice, but it does not have the non-skid texture the Abrams should have on the hull. The clear plastic bits provided for the periscopes and optics are lame. I used large mylar confetti cut to fit instead, looked better.
Basically this is a great model for the price. If you're a serious hardcore modeler you might be happier with a Dragon or other higher end model for the fine details, but if you just want a solid 1:35 scale Abrams, and have fairly modest modeling experience, this model will get you what you want for half to two thirds of the price of a more expensive model. Even if you are into more fancy models, this would be a great starting point for after market kit parts.
Customers who bought this item also bought
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
Reviews with images
This is one of the better M1 tank models on the market
This is one of the better M1 tank models on the market. Assembly is good, there's a few issues I'll detail later. However for the price, it's a good representation of several versions of the Abrams tank, and comes with a lot of nice extras. So first, the good:+This kit will let you assemble one of the following: two different M1A2s from 3 ACR circa 2003, one US Army M1A1 from 2003, a USMC M1A1 also from 2003, and then two US Army tanks operating in Germany or Kosovo circa 1999. There's decals for all of those, complete painting schematics, and the different equipment from type to type (CITV for M1A2s, Missile Counter-Measure and different smoke grenade launchers for the USMC version etc)+Assembly is pretty easy. There's nothing that was too tricky about it. Almost everything fits+Instructions are clear, each different type of tank has clearly marked call outs for specific assembly steps.+Tracks are great for "rubber band" style. They take and keep paint and glue, handled all the weathering products I use without damage or marring.+Unlike many models, it comes with bags and boxes to help you fill out the stowage.And the bad:-Minor fit issue with the top hull to the rear of the tank. If you don't do anything to it, it sorta stands out a little bit, but it cleans up okay, just annoying.-This is not the most detailed Abrams on the market. It's quite nice, but it does not have the non-skid texture the Abrams should have on the hull. The clear plastic bits provided for the periscopes and optics are lame. I used large mylar confetti cut to fit instead, looked better.Basically this is a great model for the price. If you're a serious hardcore modeler you might be happier with a Dragon or other higher end model for the fine details, but if you just want a solid 1:35 scale Abrams, and have fairly modest modeling experience, this model will get you what you want for half to two thirds of the price of a more expensive model. Even if you are into more fancy models, this would be a great starting point for after market kit parts.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on April 6, 2016
+This kit will let you assemble one of the following: two different M1A2s from 3 ACR circa 2003, one US Army M1A1 from 2003, a USMC M1A1 also from 2003, and then two US Army tanks operating in Germany or Kosovo circa 1999. There's decals for all of those, complete painting schematics, and the different equipment from type to type (CITV for M1A2s, Missile Counter-Measure and different smoke grenade launchers for the USMC version etc)
+Assembly is pretty easy. There's nothing that was too tricky about it. Almost everything fits
+Instructions are clear, each different type of tank has clearly marked call outs for specific assembly steps.
+Tracks are great for "rubber band" style. They take and keep paint and glue, handled all the weathering products I use without damage or marring.
+Unlike many models, it comes with bags and boxes to help you fill out the stowage.
And the bad:
-Minor fit issue with the top hull to the rear of the tank. If you don't do anything to it, it sorta stands out a little bit, but it cleans up okay, just annoying.
-This is not the most detailed Abrams on the market. It's quite nice, but it does not have the non-skid texture the Abrams should have on the hull. The clear plastic bits provided for the periscopes and optics are lame. I used large mylar confetti cut to fit instead, looked better.
Basically this is a great model for the price. If you're a serious hardcore modeler you might be happier with a Dragon or other higher end model for the fine details, but if you just want a solid 1:35 scale Abrams, and have fairly modest modeling experience, this model will get you what you want for half to two thirds of the price of a more expensive model. Even if you are into more fancy models, this would be a great starting point for after market kit parts.
This is one of the better M1 tank models on the market
Reviewed in the United States on April 6, 2016
This is one of the better M1 tank models on the market. Assembly is good, there's a few issues I'll detail later. However for the price, it's a good representation of several versions of the Abrams tank, and comes with a lot of nice extras. So first, the good:Reviewed in the United States on April 6, 2016
+This kit will let you assemble one of the following: two different M1A2s from 3 ACR circa 2003, one US Army M1A1 from 2003, a USMC M1A1 also from 2003, and then two US Army tanks operating in Germany or Kosovo circa 1999. There's decals for all of those, complete painting schematics, and the different equipment from type to type (CITV for M1A2s, Missile Counter-Measure and different smoke grenade launchers for the USMC version etc)
+Assembly is pretty easy. There's nothing that was too tricky about it. Almost everything fits
+Instructions are clear, each different type of tank has clearly marked call outs for specific assembly steps.
+Tracks are great for "rubber band" style. They take and keep paint and glue, handled all the weathering products I use without damage or marring.
+Unlike many models, it comes with bags and boxes to help you fill out the stowage.
And the bad:
-Minor fit issue with the top hull to the rear of the tank. If you don't do anything to it, it sorta stands out a little bit, but it cleans up okay, just annoying.
-This is not the most detailed Abrams on the market. It's quite nice, but it does not have the non-skid texture the Abrams should have on the hull. The clear plastic bits provided for the periscopes and optics are lame. I used large mylar confetti cut to fit instead, looked better.
Basically this is a great model for the price. If you're a serious hardcore modeler you might be happier with a Dragon or other higher end model for the fine details, but if you just want a solid 1:35 scale Abrams, and have fairly modest modeling experience, this model will get you what you want for half to two thirds of the price of a more expensive model. Even if you are into more fancy models, this would be a great starting point for after market kit parts.
Images in this review
Reviewed in the United States on January 28, 2022
This model is typical of TAMIYA's excellent quality. There are three figures (and a dog) included, even though the product description implies just two. Optional parts and decals are provided for six different configurations.
Likes: The model is molded in "desert sand" color, so it doesn't really need to be repainted. Flexible tracks help for quicker assembly. Parts are free of flash, and fit together very well. The instructions are error-free and also include a brief history of the M1A1HA and M1A2 tanks.
Dislikes: The optional Identification Panels need to be cut from provided plastic stock. No driver figure is included (though the third figure could be cut up for that purpose). There are holes in the bottom of the hull, possibly for a motorized version of this kit.
Likes: The model is molded in "desert sand" color, so it doesn't really need to be repainted. Flexible tracks help for quicker assembly. Parts are free of flash, and fit together very well. The instructions are error-free and also include a brief history of the M1A1HA and M1A2 tanks.
Dislikes: The optional Identification Panels need to be cut from provided plastic stock. No driver figure is included (though the third figure could be cut up for that purpose). There are holes in the bottom of the hull, possibly for a motorized version of this kit.
Images in this review
Reviewed in the United States on March 6, 2023
The fit and finish was excellent and the instructions were clear. One can build five types depending on the field of deployment with paint schemes in the instructions. This was great fun fun for a novice such as myself. I hit the internet for photos of finished models and the real tank in action it was very helpful.it comes in desert tan and I left it that way but chose yours based on your skill and ambition. This would be a great kit for parents and kids.
Images in this review
Reviewed in the United States on November 5, 2023
Lots of options. Very detailed. Parts fit well. A tad small but still a great model.
Images in this review
Reviewed in the United States on September 28, 2023
Top reviews from other countries
martijn misérus
Precies zoals die op het plaatje eruit ziet :)
Reviewed in the Netherlands on March 15, 2024Sandro Martelli
Kit fatto veramente bene, consigliato l'acquisto
Reviewed in Italy on December 5, 2023
Bastijans
TAMIYA 300035269 300035269-1:35 US Kampfpanzer M1A2
Reviewed in Germany on August 15, 2023